Mini Fire Extinguisher Shaped Pendant Type Fire Extinguisher Shaped Lighter Key Chain
Item specifics
Product Description
- Brand Name:Sanqiao
- Model Number:Mini Lighter
- Usage:Cigarette
- Style:Gas
- Material:Metal
- Size:height approx. 7cm / 2.76in, diameter approx. 2cm / 0.79in
Product Description
Size: height approx. 7cm / 2.76in, diameter approx. 2cm / 0.79in
Material: metal
Correct Refilling Operations:
1. Hold against the refilling core with a small tool to completely let the residual gas out before refilling, thus eliminating the pressure in the lighter gas tank.
2. Vertically press down the outlet of the gas tank for about 5 seconds per time. 2-3 times are enough.
3. Please wait for about 5 minutes after refilling is finished. You can adjust the valve when it can not be lighted even after 5 minutes. (Pay attention to the detailed refilling description.)
Refilling Methods:
1. Stay away from the fire to ensure safety when refilling. Don't refill while smoking;
2. Some qualified butane gas must be used because poor quality gas may damage the lighter or reduce the service life;
3. Please turn the lighter upside down when refilling the ordinary models. Then aim at the gas tank outlet and cover the lighter inlet. Forcefully press several times and keep for about 2 seconds each time. There may be residual gas in the gas tank when the gas tank can not be refilled. You can let the gas escape 1-2 times with a small screwdriver aiming at the inlet at this time and refill again;
4. You can release the inlet nut with a slotted screwdriver or other tools and follow the above steps when a Ronson lighter is being refilled. Tighten the nut after refilling. But it can not be too tight, otherwise the cover will not be tightened, the cover sound is not crisp and the gas may escape.
5. Open the lighter cover when refueling the gasoline lighter, pull out and reverse the lighter core and lift the outer sponge to add a right amount of gasoline. Cover the outer sponge and place it in the lighter when the gasoline permeates into the inner sponge;
6. You have to wait for at least 1 minute, allowing the new refilled gas temperature to reach the room temperature after all kinds of lighters are refilled. It can only be lighted after the residual gas around it totally volatilizes. If lighting is carried out at this time, it may cause unnecessary danger due to the burning residual gas on the lighter. Too high or too low flame height is a normal phenomenon after it is refilled. The flame height can be moderately adjusted.
Flame Adjustments:
1. With the gas content reduction and the ambient temperature change, there will be a certain degree of change of the the flame height, which is a normal phenomenon during the using process. You can make a moderate adjustment to the height of the flame;
2. The normal flame height should be 1.5-2.5cm for windproof and direct-refilling lighters and 2.5-4cm for Ronson, gasoline and open fire lighters.
3. Please aim at the flame adjustment groove with a slotted screwdriver when flame height adjustment is needed. Lighters with adjustable ring can be directly adjusted with your fingers. Turn to the (-) arrow direction for clockwise rotation to decrease the flame height. Turn to the (+) arrow direction for counterclockwise rotation to increase the flame height. Note: Counterclockwise rotation can not exceed a half circle on the basis of normal flame height. Otherwise, it may damage the product.
4. The flame height can be controlled by lighter wick height adjustment for gasoline lighters. You can cut the wick with when the flame is too high. You can appropriately pull out the wick when the flame is too low.
Precautions:
1. Please keep the lighter away from children because there is pressurized flammable gas in it;
2. Don't puncture or throw the lighter. Don't throw it into the fire;
3. It should be used in a ventilated environment. Pay attention to the flammable materials;
4. Don't point the lighter toward your face, skin, clothing and other combustible substances to avoid any danger;
5. Please confirm the fire outlet location for moderate lighting. There are different ways of lighting for different types of lighters such as straight lighting and side lighting. Quickly rub the matte roller for lighting gasoline lighters. And rub the roller from right to left with your thumb for lighting Ronson lighters;
6. Try your best to blow off the impurities when accidental ash and other impurities fall into the fire outlet, otherwise it will cause poor fire quality;
7. For Ronson and gasoline lighters, the gas will escape once the lighter cover is opened. So please do tighten the cover for storage when not in use;
8. This product is not suitable for lighting. It can not be continuously lighted for more than 1 minute to avoid any scald caused by high temperature to the skin;
9. The lighter can not be put in a high temperature environment (50 degrees Celsius / 122 degrees Fahrenheit) for a long time. It can not be stored in a place out of direct sunlight such as stove surroundings, outdoor closed empty cars and trunks;
10. Due to the lighting condition limit in regions where the altitude is over 3000 meters, windproof and direct-lighting lighters may be greatly affected. At this time it is recommended to use open fire lighters;
11. You should be clear about the fire outlet, lighting part, gas inlet and flame adjuster for normal use when desktop and other handicraft lighters are used.
12. Some qualified butane gas must be used because poor quality gas may damage the lighter or reduce the service life.
Note:
Gas is not filled. (Lighter Gas Type: Butane)
Packing List:
1 * Fire Extinguisher Shaped Lighter Key Chain (Without Gas)
Material: metal
Correct Refilling Operations:
1. Hold against the refilling core with a small tool to completely let the residual gas out before refilling, thus eliminating the pressure in the lighter gas tank.
2. Vertically press down the outlet of the gas tank for about 5 seconds per time. 2-3 times are enough.
3. Please wait for about 5 minutes after refilling is finished. You can adjust the valve when it can not be lighted even after 5 minutes. (Pay attention to the detailed refilling description.)
Refilling Methods:
1. Stay away from the fire to ensure safety when refilling. Don't refill while smoking;
2. Some qualified butane gas must be used because poor quality gas may damage the lighter or reduce the service life;
3. Please turn the lighter upside down when refilling the ordinary models. Then aim at the gas tank outlet and cover the lighter inlet. Forcefully press several times and keep for about 2 seconds each time. There may be residual gas in the gas tank when the gas tank can not be refilled. You can let the gas escape 1-2 times with a small screwdriver aiming at the inlet at this time and refill again;
4. You can release the inlet nut with a slotted screwdriver or other tools and follow the above steps when a Ronson lighter is being refilled. Tighten the nut after refilling. But it can not be too tight, otherwise the cover will not be tightened, the cover sound is not crisp and the gas may escape.
5. Open the lighter cover when refueling the gasoline lighter, pull out and reverse the lighter core and lift the outer sponge to add a right amount of gasoline. Cover the outer sponge and place it in the lighter when the gasoline permeates into the inner sponge;
6. You have to wait for at least 1 minute, allowing the new refilled gas temperature to reach the room temperature after all kinds of lighters are refilled. It can only be lighted after the residual gas around it totally volatilizes. If lighting is carried out at this time, it may cause unnecessary danger due to the burning residual gas on the lighter. Too high or too low flame height is a normal phenomenon after it is refilled. The flame height can be moderately adjusted.
Flame Adjustments:
1. With the gas content reduction and the ambient temperature change, there will be a certain degree of change of the the flame height, which is a normal phenomenon during the using process. You can make a moderate adjustment to the height of the flame;
2. The normal flame height should be 1.5-2.5cm for windproof and direct-refilling lighters and 2.5-4cm for Ronson, gasoline and open fire lighters.
3. Please aim at the flame adjustment groove with a slotted screwdriver when flame height adjustment is needed. Lighters with adjustable ring can be directly adjusted with your fingers. Turn to the (-) arrow direction for clockwise rotation to decrease the flame height. Turn to the (+) arrow direction for counterclockwise rotation to increase the flame height. Note: Counterclockwise rotation can not exceed a half circle on the basis of normal flame height. Otherwise, it may damage the product.
4. The flame height can be controlled by lighter wick height adjustment for gasoline lighters. You can cut the wick with when the flame is too high. You can appropriately pull out the wick when the flame is too low.
Precautions:
1. Please keep the lighter away from children because there is pressurized flammable gas in it;
2. Don't puncture or throw the lighter. Don't throw it into the fire;
3. It should be used in a ventilated environment. Pay attention to the flammable materials;
4. Don't point the lighter toward your face, skin, clothing and other combustible substances to avoid any danger;
5. Please confirm the fire outlet location for moderate lighting. There are different ways of lighting for different types of lighters such as straight lighting and side lighting. Quickly rub the matte roller for lighting gasoline lighters. And rub the roller from right to left with your thumb for lighting Ronson lighters;
6. Try your best to blow off the impurities when accidental ash and other impurities fall into the fire outlet, otherwise it will cause poor fire quality;
7. For Ronson and gasoline lighters, the gas will escape once the lighter cover is opened. So please do tighten the cover for storage when not in use;
8. This product is not suitable for lighting. It can not be continuously lighted for more than 1 minute to avoid any scald caused by high temperature to the skin;
9. The lighter can not be put in a high temperature environment (50 degrees Celsius / 122 degrees Fahrenheit) for a long time. It can not be stored in a place out of direct sunlight such as stove surroundings, outdoor closed empty cars and trunks;
10. Due to the lighting condition limit in regions where the altitude is over 3000 meters, windproof and direct-lighting lighters may be greatly affected. At this time it is recommended to use open fire lighters;
11. You should be clear about the fire outlet, lighting part, gas inlet and flame adjuster for normal use when desktop and other handicraft lighters are used.
12. Some qualified butane gas must be used because poor quality gas may damage the lighter or reduce the service life.
Note:
Gas is not filled. (Lighter Gas Type: Butane)
Packing List:
1 * Fire Extinguisher Shaped Lighter Key Chain (Without Gas)